by Clint Brown
Today’s blog is an improvement on some work I did last year (see part1 of this blog)
In some instances it is necessary to view the iProperties of a model in both Metric and Imperial format.
To achieve this, I have written a bit of iLogic code to extract the information that we need. The Code creates a few custom iProperties and does some unit conversions based on Imperial/Metric conversions. We are then presented with a message box which tells us what the current document units are, and then displays Area, Mass and Volume in both imperial and metric measurements.
To add this to your model (part or assembly), simply create a new rule in your part or assembly, and paste in this code into it.
'----------------START OF iLOGIC CODE-----------------------------------
CadlineDoc = ThisDoc.Document
iProperties.Value("Custom", "UNITlength") = CadlineDoc.unitsofmeasure.LengthUnits
iProperties.Value("Custom", "UNITmass") = CadlineDoc.unitsofmeasure.MassUnits
If iProperties.Value("Custom", "UNITlength") = 11269 And
iProperties.Value("Custom", "UNITmass")= 11283 Then
iProperties.Value("Custom", "UNITMASTER") = "Metric"
Else If iProperties.Value("Custom", "UNITlength") = 11272 And
iProperties.Value("Custom", "UNITmass") = 11286 Then
iProperties.Value("Custom", "UNITMASTER") = "Imperial"
End If
If iProperties.Value("Custom", "UNITMASTER") = "Metric" Then
'Write Metric Props to Custom iProps
iProperties.Value("Custom", "Area") = Round(iProperties.Area, 2)
iProperties.Value("Custom", "Mass") = Round(iProperties.Mass, 2)
iProperties.Value("Custom", "Volume") = Round(iProperties.Volume, 2)
'Write Imperial Props to Custom iProps
iProperties.Value("Custom", "AreaIMP") = Round((iProperties.Area*0.001550003100006), 2)
iProperties.Value("Custom", "MassIMP") = Round((iProperties.Value("Custom", "Mass")*2.20462), 2)
iProperties.Value("Custom", "VolumeIMP") = Round((iProperties.Volume*0.0000610237), 2)
End If
If iProperties.Value("Custom", "UNITMASTER") = "Imperial" Then
'Write Metric Props to Custom iProps
iProperties.Value("Custom", "Area") = Round(iProperties.Area/0.001550003100006, 2)
iProperties.Value("Custom", "Mass") = Round((iProperties.Mass/2.20462), 2)
iProperties.Value("Custom", "Volume") = Round(iProperties.Volume/0.0000610237, 2)
'Write Imperial Props to Custom iProps
iProperties.Value("Custom", "AreaIMP") = Round((iProperties.Area), 2)
iProperties.Value("Custom", "MassIMP") = Round((iProperties.Value("Custom", "Mass")), 2)
iProperties.Value("Custom", "VolumeIMP") = Round((iProperties.Volume), 2)
End If
MessageBox.Show ("This Documents units are " & _
iProperties.Value("Custom", "UNITMASTER")& vbLf & vbLf & _
"Area = " & iProperties.Value("Custom", "Area") & " mm^2" & _
vbLf & "Mass = " & iProperties.Value("Custom", "Mass") & " kg" & vbLf & _
"Volume = " & iProperties.Value("Custom", "Volume") & vbLf & vbLf & _
"Area = " & iProperties.Value("Custom", "AreaIMP") & " in^2" & _
vbLf & "Mass = " & iProperties.Value("Custom", "MassIMP") & " lbs" & vbLf & _
"Volume = " & iProperties.Value("Custom", "VolumeIMP") & _
" in^3", "www.CadlineCommunity.co.uk")
'--------------------END OF iLOGIC CODE-----------------------------------
Commentaires (0 commentaire)