By Miles Nicholson
Changing the Default Zoom in the Surfer
To change the surfer zoom ratio:
Open your DWT template border or a specific drawing such as a panel layout within a specific project
Set ATTMODE = 2
Select Conversion ribbon tab > Tools panel > 
XDATA Editor and select the WD_M block (positioned at 0,0)
Add New
Add VIA_WD_SURF_ZOOM and set the required zoom level in the Value field. The normal zoom ratio is set at 2 (64 if metric). A larger value will zoom out more.
Set ATTMODE = 0
Once you have added the xdata, the easiest way to set the zoom rather than defining a specific number is to use the Zoom In / Zoom Out buttons and then to select Zoom Save once you are happy with the zoom ratio
Opmerkingen (0 opmerkingen)