By Miles Nicholson
When working with a client’s border or when creating a new border from scratch, AutoCAD Electrical has commands to help you create the X zones or X-Y grid referencing. The X zones, Y zones or the X-Y zones are used for cross referencing purposes. An analogy of this is the road atlas and its grid system to locate where a town is situated.
This command is used to set up an X-Y grid.
This command is used to set up X zones
This command is used to set up X or Y zones dependent upon the Drawing Properties > Drawing Format > Ladder Default orientation
The command also give you the ability to draw rungs, bus wires.
As an example of one of the above commands select:
The above will create 8 equal columns of 50mm with an origin point of 10,287 and labelled from 1.
Opmerkingen (0 opmerkingen)