By John Flanagan
Introduction
Delegates often ask the question - How do I delete a curtain wall grid when modifying my curtain walls in Revit?
Deleting a Curtain Wall Grid
Deleting a curtain wall grid from the basic curtain wall type in Revit Architecture is quite straightforward. Select the grid (use TAB key if needed) and press the delete button.
However, if the grid was created using the (out of the box) Storefront type or any other type that 'generated' the grid pattern based on the type parameters, Revit does not allow you to delete it. The type parameters for grid patterns are illustrated below:
Fig 1: Fixed Curtain Grid Pattern
Selecting the grid also shows a pin like this:
Fig 2: Pinned Gridline
Unpinning does not allow you to delete it.
To be able to delete the grids, you need to:
- Change the Grid Pattern type parameters to none like this:
Press ok.
Fig 3: Grid Pattern Type Parameters Set To None
- Revit gives a warning that the Type generated gridlines will become non-associated. Press OK. Don't press Delete Gridlinebutton. (You don’t have to delete the 'all' the gridlines, right?)
- Now Revit allows you to delete any unnecessary grids. You don’t even have to unpin them.
It is a good idea to duplicate the Curtain Wall style before changing the type parameters, so that the change does not affect any other Curtain Wall.
Revit does not change any default grid patterns or any user edited custom Grid patterns when you choose "none". It just makes the gridlines non associated.
Komentarze (Komentarze: 0)